A driver is really important for your computer. The reason is because, without a driver, your computer cannot recognize or notice other peripherals attached to it. Take one example of the display driver. Without display driver, the LCD will not display anything but the dead screen. That also applies if you consider a printer driver into account. If you want to print something, you just cannot print it right away before you set everything up. Setting up the printer is fairly simple because you just need to assemble the cables to the appropriate place. However, it is not enough because you also need to install driver too. Without the driver, your computer will not know that a printer is attached.
How To Use Printer Driver
Using driver for the printer is fairly easy. Well, basically you do not use the printers driver because the one that needs it is the operating system. The operating system will utilize the driver software to recognize any additional printing device that is suitable for the driver. After that, a connection is established and you can start printing stuff that you like. However, before reaching to that step, you will be using the printer driver by installing it to your computer. The installation does not take too much time. Typically, it only takes 5 – 10 minutes depending on how your computer performs and whether you want to read everything in the installation wizard.
Now after you have done downloading the printer, you can use your printer right away. However, it is recommended to restart your computer to ensure everything is installed well. Some people definitely skip this step because they want to print something right away. That is fine as long as your computer does not immediately hang. The safe bet is always to restart your printer after installing the printer driver. That is how to utilize the driver properly.